Special VCR Features (continued)
*Important: Ifthe remotecontrolPOWER,ACTION, PROG,CH_IJV, INDEX orADD/DLTbutton doesnot
workwhenpressed,presstheVCR buttonontheremoteandtrythebuttonagain.
[_Check list before you begin.
[] Allconnectionsare made.
(See pages6-9.)
[] VCR ispluggedin.
[] TV istumedonandset to theVCR
channel(CH 3 or4).
REC/TIME
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature may be used to keep young children
from operating the VCR.
Hold down REC/TIME on the VCR
without a cassette inserted for 7
seconds during Power On mode.
• "NO CASSETTE PLEASE INSERT A
CASSETTE" is displayed when RECITIME
is pressed. Rease disregard this warning
and continue to hold down REC/TIME for
7 seconds.
VCR LOCK ACTIVATED
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
VCR for 7 seconds again while in
Stop mode.
VCR LOCK OFF
!
4
.2
3
• VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
Warning Beeper Feature
When you Select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
1 Press ACTION* to display the
menu.
2 Press AV to select =SET UP
VCR," and then press • to
display the =SET UP VCR" screen.
MENU .........
m
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID IOMM LANGtE: ENGLISH
SELEC'r:A • KEY
SET :1_ KEY
: END, :_'rmN KEY
3 Press AV to select =BEEPER,"
and then press • to select "ON"
or =OFF."
4 Press ACTION twice to exit this
screen.
'""" SET UP VCR
PLAY :ON
EP,.UE _ i ON
ON
I SELECt:&_ KEY
ISL=I" :=,KEY
I END :ACTION KEY
22
To Next Page
Loading...
Need help?
General