Panasonic Omnivision PV-V4020 User Manual

VCR & Cassette Information
Reset all VCR Memory Functions Prevent Accidental Tape Erasure
Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
• Make sure a tape is not inserted in the VCR.
for moro ths.n 5 soconds.
• The power will shut off.
3 Do “One Time VCR Setup” steps on page 6.
DST (Daylight Saving Time) Record/Piayback Time
VCR auto adjusts clock for DST. (Page 7.)
Spring (First Sunday in April)
DST:ON -> sets clock ahead one hour.
Autumn (Last Sunday In October)
DST:ON -> Turns clock back one hour.
• If your area does not observe Daylight Saving
Time, select DST:OFF.
• Keep these time changes in mind when
programming the VCR for timer recordings.
Only use tapes with the ivnsi mark in this unit.
Tape Speed
Setting
Type of Video Cassette
T60 T120
T160
SP
(Standard Play)
1 Hour
2 Hours
2 Hours
40 Minutes
LP
(Long Play)
2 Hours
4 Hours
5 Hours
20 Minutes
SLP
(Super Long Play)
3 Hours
6 Hours
8 Hours
30
For assistance, call 1-800-211-PANA(7262).

Panasonic Omnivision PV-V4020 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4020
Category	VCR
Language	English