Panasonic Omnivision PV-V4020 User Manual

Record On a Tape
•Important: If the remote control POWER, ACTION, PROGA/CR+, CH A/V,
NUMBERED keys, INPUT, SEARCH or ADD/DLT button does not work when
pressed, press the VCR button on the remote and try the button again.
IV| Check list before you begin.
D All connections are made.
D TV is turned on and tuned to CH3 or 4 or Video.
D Cassette record tab is in place.
□ Remote in VCR mode.
^ I I Insert a cassette.
VCR power comes on and “VCR”
appears on Multi Function Display.
Record tab=
Multi Function Display
<2:039 EJECT LIGHT
(( 0 j) ®
VCRH'V
I CD GD QD
GD CD CD
,_CD CD CD
AOCVPLT
CD CD ^
■ OOlATtA RCSfT
a
PAUSE OiWIP SPttO SfARCH.
cara O Oa
SLOW -—.
(D CDS
Q Q
PAUSE/
SLOW
3sPEED
4
Model PV-V4520 remote Is shown here.
TTDrDT Select Channel.
SoS PfessCHA/T*orNUMBEREDkeys.
^ ^ ^or th u ‘To select “LINE,” see page 11.
G3 QD CD i ■ r a
_ _ l^jF • To select channels over 100,
® ® first press 100 key, then enter
-1 remaining two digits.
spnpD Select Recording speed.
(See page 30.)
^ Press SPEED.
• SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed on TV
screen and Multi Function Display.
~ Start Recording.
( 1 ^ Press REC.
_ • To edit out unwanted portions,
press PAUSE/SLOW to pause
and to resume recording.
I To stop --> Press STOP.
I One Touch Recording
Press REC repeatedly to set the recording length
(30 min. - 4 hours).
• The VCR turns itself off at the preset time.
.^Normal Rec— ► 0:30— ► 1 : 00'>.
•4:00 3:00*^2:00-
w I
1:30-*^
After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.
This video recorder, equipped with the HQ (High I
Quality) System, is compatible with existing VHS '
equipment. Only use those tapes with the IVHSI
mark. It is recommended that only cassette tapes
that have been tested and inspected for use in 2,
4, 6, and 8 hour VCR machines be used.
I Record One Program While Watching Another
Press VCR/TV-> “VCR” disappears on Multi Function Display
--> Select Channel at the TV.
I Selecting Channel at the VCR (You cannot view
another channel during recording.)
Press VCR/TV--> “VCR” appears on Multi Function Display
--> Select Channel at the VCR (applies to connection b)
only. (See page 4)
Record using VCR controls ^
p Select *| Insert A Start
^ Channel. ' a cassette. T Recording.
VCR/TV
I Press to stop.
Playback/Recording

Panasonic Omnivision PV-V4020 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4020
Category	VCR
Language	English