To Next PageTo Next Page
Need help?Do you have a question about the Panasonic P2HD AG-3DP1G and is the answer not in the manual?
General| Sensor Type | 3MOS |
|---|---|
| Focus | Auto/Manual |
| Recording Format | AVC-Intra 100/50, DVCPRO HD, DVCPRO50, DVCPRO, DV |
| Recording Media | P2 Card |
| Sensor Size | 1/3" |
| Effective Pixels | Approx. 2.07 megapixels (1920 x 1080) |
| Aperture | f/1.6 to f/2.8 |
| Video Resolution | 1920x1080, 1280x720, 720x480 |
| Frame Rate | 29.97p, 25p, 23.98p |
| Audio Format | 48kHz/16-bit |
| Viewfinder | 0.45-inch color LCD (approx. 1, 226, 000 dots) |
| LCD Screen | 3.5 inch LCD |
| Input/Output | HDMI, SDI, USB |
| Battery | Lithium-ion |
| 3D Recording | Yes |
Consolidates all warnings and cautions for safe operation and handling of the camera.
Covers critical safety advice for operating the equipment and handling components.
Information on disposing of the product and its software licensing.
Details the camera's advanced features like VFR, 14-bit processing, and gamma curves.
Details P2 card capabilities, interval recording, and clip previews.
Illustrates system components, accessories, and setup overview.
Explains power supply, audio input/output, and accessory connection points.
Details shooting, playback, menu navigation, and time code operations.
Explains status indicators, warnings, LCD monitor, and viewfinder functions.
Guides setting the clock, time zone, and managing P2 cards.
Details shooting steps, recording modes like 2D LL, and VFR capabilities.
Explains interval recording, REC CHECK, and shot marker functions.
Guides signal selection, video output, and electronic shutter adjustments.
Details balance adjustments and 3D recording settings like convergence.
Explains setting and managing time codes and user bits for accurate data.
Details battery usage, external power, and audio input setup.
Covers mounting accessories and connecting external switches.
Covers thumbnail display, selection, playback, and switching views.
Details shot marks, clip metadata, and editing clip information.
Explains formatting P2/SD cards and checking card status indicators.
Explains how to navigate menus and initialize settings.
Details the hierarchy and options within the setup menu system.
Covers key menu configurations like SW Mode, Audio, Output, and Display.
Details connecting the AJ-RC10G remote control unit for camera operation.
Explains using the AG-EC4G unit to adjust the convergence point.
Outlines checks for camera unit, recording functions, and audio levels.
Explains warning indicators, error messages, and troubleshooting procedures.
Provides physical dimensions and general operating parameters.
Details camera unit specs, lens, frame rates, and video compression formats.
Lists video, audio, and other connector signal assignments.
