105
Chapter 6 Manipulating Clips with Thumbnails
Saving the Log Data
Equipment log data can also be stored in an SD memory
card from the thumbnail screen. With an SD memory card
inserted in the unit, perform the following operation:
1
Press the THUMBNAIL button.
• The thumbnail screen appears on the LCD
monitor.
2
Press the MENU button and select
OPERATION ➝ LOG DATA from the thumbnail
menu.
3
When the following screen appears, use the
cursor buttons and the SET button to select
YES.
4
Press the SET button.
• Log data are saved in the SD memory card.
To Next Page
Loading...
