122
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
The display can be switched so that only those clips
matching the specified conditions are displayed in the
thumbnail screen.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the THUMBNAIL MENU button.
The thumbnail menu appears.
3 Select THUMBNAIL from the thumbnail menu.
Switch the thumbnail display by selecting one of the
following items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system format.
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached. At this time the
thumbnails appear in selected order.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted in the
specified slot.
When this item is selected, SLOT1 to SLOT2 are
displayed as a sub-menu. Select the desired slot to
display the clips.
SETUP:
Please refer to [Setting the Thumbnail Display Mode]
(page 132) for information about this item.
EXIT:
Close the sub-menu.
Switching the Thumbnail Display
AJ-HPX3100G(VQT3A79)_E.book 122 ページ ２０１０年９月１７日 金曜日 午後９時２１分
To Next Page
Loading...
