Panasonic P2HD AJ-HPX3100G - Downcon Setting; Lcd Monitor

167
Menu: Menu Description Tables
Menu
◆Note
The <DOWNCON SETTING> screen is displayed when SYSTEM
MODE is set to 1080-59.94i, 1080-50i (HD mode).
DOWNCON SETTING
Items/
Data Saved
Adjustable
Range
Remarks
DOWNCON
MODE
SQUEEZE
LT-BOX
S-CROP
For setting the mode of the down
converter output signals.
Note
Part of the down converter output image
at the top or bottom may be disrupted
when “LT-BOX” is selected in this menu
option, but this is not a malfunction.
–CUFR
DETAIL ON
OFF
For setting the detail function for the
down converter output signals ON/OFF.
The down converter output signals
contain detailed components that are set
during HD signal processing. In this
setting, these signals overlap the detailed
components dedicated to the down
converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.
–CUFR
H.DTL LEVEL 00
:
08
:
31
For setting the horizontal detail correction
level for the down converter output
signals.
–CUFR
V.DTL LEVEL 00
:
04
:
31
For setting the vertical detail correction
level for the down converter output
signals.
–CUFR
DTL CORING 00
01
:
15
For setting the noise elimination level of
the details.
–CUFR
H.DTL FREQ. 1
:
3
:
5
For selecting the horizontal detail
frequencies.
1: 2.5 MHz 4: 4 MHz
2: 3 MHz 5: 4.5 MHz
3: 3.5 MHz
–CUFR
2D LPF ON
OFF
For setting the 2-D low path filter reducing
cross colors.
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.
–CUFR
SETUP 0%
7.5%
For setting the setup level for the down
converter output signals.
(Only for 1080-59.94i)
Note
When the system frequency is set to 50
Hz, the setup level will be 0%.
–CUFR
LCD MONITOR
Items/
Data Saved
Adjustable
Range
Remarks
BRIGHTNESS –7
:
+0
:
+7
Adjust the LCD monitor brightness.
–CUF–
COLOR LEVEL –7
:
+0
:
+7
Adjust the LCD monitor chroma level.
–CUF–
CONTRAST –7
:
+0
:
+7
Adjust the LCD monitor contrast.
–CUF–
BACKLIGHT OFF
LOW
NORMAL
HIGH
Turn the backlight off, or adjust its
brightness.
OFF: turns the backlight OFF.
LOW: turns the backlight to lower
than NORMAL.
NORMAL : Mode normally used
HIGH: This is brighter than
NORMAL
–CUF–
SELF SHOOT NORMAL
MIRROR
Select whether or not to change the LCD
monitor to mirror image.
NORMAL: Do not change to mirror
image.
MIRROR: Change to mirror image.
–CUF–
AJ-HPX3100G(VQT3A79)_E.book 167 ページ ２０１０年９月１７日 金曜日 午後９時２１分