145
Connection with external device: Connection of the extension control unit (AG-EC4G)
Connection with external device
It is possible to control some of the functions remotely by
connecting the extension control unit AG-EC4G (optional
accessory).
When AG-EC4G is connected to the REMOTE connector on
the unit and the power switches of both of the unit and AG-
EC4G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AG-EC4G is
removed or the power for the AG-EC4G is turned OFF.
In the remote control mode, the following switches and
buttons on the unit are disabled.
z SHUTTER switch
z MENU button
z JOG dial button
z GAIN switch
z OUTPUT/AUTO KNEE switch
z WHITE BAL switch
z USER MAIN button
z USER 1 button
z USER 2 button
When the remote control is connected, recording and
playback can be controlled through both the camera-
recorder and the AG-EC4G.
Notes
z Turning the AG-EC4G DATA SAVE switch to “ON” enables
recording of the configured status of the AG-EC4G on the
unit. In order to not record this configured status, turn the
AG-EC4G DATA SAVE switch to “OFF”.
z When the dedicated cable is connected or removed, ensure
that the POWER switches on both the main unit and AG-
EC4G are turned “OFF”.
z For details, refer to the operating instructions for the AG-
EC4G.
Connection of the extension control unit
(AG-EC4G)
Switch functions in the remote control mode
Recording and playback Operations in the remote
control mode
AG-EC4G
Dedicated cable
REMOTE connector
AJ-HPX3100G(VQT3A79)_E.book 145 ページ ２０１０年９月１７日 金曜日 午後９時２１分
To Next Page
Loading...
