172
Menu: Menu Description Tables
z When shooting with the MASTER GAIN set to “–6dB” or
“–3dB”, coloring phenomena may occur in portions of the
video with high brightness.
The coloring phenomena can be reduced by switching the
OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE OFF],
setting the MANUAL KNEE menu option of the <KNEE/
LEVEL> screen to “ON”, and then changing the following
menu options.
When “HD”, “SD”, “FILMLIKE1”, “FILMLIKE2” or
“FILMLIKE3” has been selected in the GAMMA MODE
SEL menu option of the <GAMMA> screen, reduce the
value in the KNEE MASTER SLOPE menu option of the
<KNEE/LEVEL> screen.
When “FILM-REC” has been selected in the GAMMA
MODE SEL menu option of the <GAMMA> screen,
reduce the value in the F-REC DYNAMIC LVL menu
option of the <GAMMA> screen.
When “VIDEO-REC” has been selected in the GAMMA
MODE SEL menu option of the <GAMMA> screen,
reduce the value in the V-REC KNEE SLOPE menu
option of the <GAMMA> screen.
MID SETTING
Items/
Data Saved
Adjustable
Range
Remarks
MASTER
GAIN
–6dB
:
6dB
:
30dB
Select the master gain from –6, –3, 0, 3,
6, 9, 12, 15, 18, 21, 24, 27, or 30dB.
SCUF–
H.DTL LEVEL 00
:
08
:
63
For performing the horizontal detail
correction level setting.
SCUF–
V.DTL LEVEL 00
:
12
:
31
For performing the vertical detail
correction level setting.
SCUF–
DTL CORING 00
:
08
:
60
For performing the noise elimination level
setting for detail.
SCUF–
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail
frequency selection.
SCUF–
LEVEL
DEPEND.
0
1
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details
of dark sections are compressed.
If the numerical value is larger, details of
bright sections are also compressed.
SCUF–
MASTER
GAMMA
0.30
:
0.45
:
0.75
For setting the master gamma. (0.01
step)
SCUF–
BLACK GAMMA –8
:
OFF
:
+8
For setting the gamma curve for the dark
portion.
–
8 to
–
1:
The dark portion is compressed.
OFF:
Standard state
+1 to +8:
The dark portion is extended.
SCUF–
B.GAMMA
RANGE
1
2
3
Select the limits for compression and
extension.
1: ~20%
2: ~30%
3: ~40%
SCUFR
MATRIX
TABLE
OFF
A
B
For selecting the color correction table
for the linear matrix.
SCUF–
COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction.
SCUF–
AJ-HPX3100G(VQT3A79)_E.book 172 ページ ２０１０年９月１７日 金曜日 午後９時２１分
To Next Page
Loading...
