85
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Adjustments and Settings for Recording
The messages that appear on the viewfinder screen to
indicate changes to settings and adjustment results may be
limited, or set not to appear, through the menu option DISP
MODE. This menu option can be found in the <VF
DISPLAY> screen, which is accessible from the VF page.
>For directions on navigating the menu, see [Setting Menu
Options] (page 160).
z: Message appears.
±: Message does not appear.
Display Modes and Setting Changes/adjustment Result Messages
#
< VF DISPLAY >
DISP CONDITION :NORMAL
DISP MODE :3
VF OUT :Y
VF DTL :05
ZEBRA1 DETECT :070%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
LOW LIGHT LVL :35%
RC MENU DISP. :OFF
MARKER/CHAR LVL :50%
SYNCHRO SCAN DISP. :
sec
Setting change/adjustment result messages and DISP MODE settings
Message appears when: Message
DISP MODE
settings
123
CC/ND filter changed.
FILTER: n (n=1, 2, 3, 4), m (m=A, B, C, D) ±±z
Gain changed.
GAIN: n dB
(n=–6, –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30)
±±z
WHITE BAL switch re-positioned.
WHITE: n (n=A, B, PRE) ±±z
OUTPUT/AUTO KNEE switch positioned at
[AUTO KNEE] or [OFF].
AUTO KNEE: ON (or OFF)
± zz
Shutter speed/mode changed.
SS: 1/100 (or 1/60, 1/120, 1/250, 1/500, 1/1000,
1/2000,
11/¢¢.¢ or 1¢¢¢.0d)
± zz
White balance adjusted (AWB performed).
Example: AWB A OK 3.2 K ± zz
Black balance adjusted (ABB performed).
Example: ABB OK ± zz
Extender selected.
Example: EXTENDER ON ±±z
USER button selected.
Example: UM: S.GAIN 30 dB ± zz
MARKER SELECT function selected
Example: MKR: A ±±z
Iris being overridden.
Example: ++ F 5.6 ± zz
The CAC lens is connected or removed.
Example: CAC LENS DATA INVALID
± zz
AJ-HPX3100G(VQT3A79)_E.book 85 ページ ２０１０年９月１７日 金曜日 午後９時２１分
To Next Page
Loading...
