Panasonic Palmcorder MultiCam PV-GS2 - Page 32

32
Recording Mode
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Wipe Mode and Mix Mode
Wipe Mode:
Like drawing a curtain, the still picture of the last
recorded scene gradually changes to the moving
image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the
still image of the last recorded scene gradually fades
out.
1 Set [TAPE RECORDING MENU] >> [DIGITAL]
>> [EFFECT1] >> [WIPE] or [MIX].
• The [WIPE] or [MIX] Indication appears.
2 Press the Recording Start/Stop Button
39
to
start recording.
3 Press the Recording Start/Stop Button
39
to
pause the recording.
• The last scene is stored in memory. The [WIPE] or
[MIX] Indication changes to [
WIPE
] or [
MIX
].
4 Press the Recording Start/Stop Button
39
to
restart the recording.
• The last image of the previous scene gradually
changes to the new scene.
• For other notes concerning this item, see page 58.
18
13 1412 15 16
39