EasyManua.ls Logo

Panasonic Palmcorder MultiCam PV-GS2 - Writing Printing Data on a Card; Protecting the Files on a Card; Deleting the Files Recorded on a Card

Panasonic Palmcorder MultiCam PV-GS2
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
Playback Mode
Writing Printing Data on a Card
( DPOF Setting)
DPOF Setting Printing data (DPOF Settings), such as
the number of images to be printed, can be written to
the Card. “DPOF” means Digital Print Order Format.
1 Set the Mode Dial
36
to Picture Playback
Mode.
2 Set [PICTURE PLAYBACK MENU] >> [EDITING]
>> [DPOF SET] >> [YES] >> [VARIABLE].
When all images are not printed, select [ALL 0].
3 Select a desired picture and press the [ENTER]
Button
14
.
The selected picture is marked with a frame.
The number of prints set by DPOF
1
is displayed.
18
13 1412 15 16
36
1
2
To Verify DPOF Setting
Select [VERIFY] in Step 2. The pictures for which 1
or more print is set in DPOF are played back
continuously.
For other notes concerning this item, see page 60.
4 Press the [ ] Button
13
or [ ] Button
16
to select the number of pictures to be
printed, and press the [ENTER] Button
14
.
• [ ] Indication
2
is displayed in the picture set.
(p. 54)
5 Repeat Steps 3 and 4 and press the [MENU]
Button
18
when the setup is completed.
Protecting the Files on a Card
( Lock Setting)
Precious les recorded on a Card can be locked to
prevent accidental erasure. (Even if les are locked,
the les will be deleted if the Card is formatted.)
1 Set [PICTURE PLAYBACK MENU] >> [EDITING]
>> [FILE LOCK] >> [YES].
2 Select the le to be locked, and press the
[ENTER] Button
14
.
• The selected le is locked and the [ ]
Indication
1
appears. Repeat this procedure to
lock 2 or more les.
Press the [ENTER] Button
14
again to cancel.
The SD Memory Card has a write protection switch.
(p. 60)
For other notes concerning this item, see page 60.
18
13 1412 15 16
1
Deleting the Files Recorded on a Card
Using the Camcorder, you can delete the les
recorded on a Card. After the le is deleted, it cannot
be restored.
To Select and Delete Files or Titles
1 Set [PICTURE PLAYBACK MENU] >> [DELETE]
>> [FILE BY SEL] >> [YES].
2 Select the le you wish to delete and press
the [ENTER] Button
14
.
The selected picture is marked with a frame.
To erase 2 les or more, repeat this step.
18
13 1412 15 16
To erase a title in [PICTURE PLAYBACK MENU],
select [TITLE BY SEL].

Table of Contents

Related product manuals