Panasonic Palmcorder Palmsight PV-L858 - Basic Operation; Camera Recording

Camera Recording
Simple Recording Before you begin...
= + Connect the Camcorder to a power source.
teres * Insert a cassette with record tab (see page 12).
I Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
EVF
* Make sure the
POWER switch is
fully rotated to
the CAMERA
position.
Record/Pause
mode.
2 With the Viewfinder Eye Cup
against your eye, adjust the Vision
Adjustment Control to your eye-
sight.
ed sida the TAPE SPEED Selector to
SP or SLP (refer to page 12).
7, a RECORD/PAUSE to start
recording.
The Tally Lamp and REC Indicator are
lit during recording.
RECORD
Press the RECORD/PAUSE again to
pause the recording.
Note: Set the Power switch to OFF after
« When your Camcorder is aimed at excessively recording Is finished.
bright objects, or bright lights, a vertical bar
may appear in the picture. This is a normal e To remove the cassette
characteristic of the CCD pick-up device. Try In Record/Pause mode, slide the TAPE
to avoid this when possible. EJECT switch (refer to page 12).
23
gJ
pad
=
O
O
Lo
M
=
Dm
=
O
=».