Panasonic Palmcorder Palmsight PV-L858 - SUE STO a Wido Is

Still / Strobe / Wide
Slide the DIGITAL SELECT switch to
STILL/STROBE.
(Normal) m (Wide)
progression of still images, (in 1/6 of a
Before you begin...
+ Set the POWER switch to CAMERA.
STILL/STROBE/WIDE Selection order
Third Press
Hold down ao more
pirar Second than 3 seco
ress Press
— —»-fwide}
nos
Third
Press
Fourth
Press
STILL
Use this feature to record a still image from
the current camera picture.
Press the STILL/STROBE button once.
Press two more times to return to normal
recording.
STROBE
Use this feature to record a strobing
second intervals).
Press the STILL/STROBE button twice.
Press once to return to normal recording.
WIDE SCREEN
Use this feature to fill the entire screen of
your Wide Screen TV.
Hold down the STILL/STROBE button for
more than 3 seconds while in Strobe
mode (see above).
Press once again to return to a norma!
sized picture recording.
Note:
» Wide screen recordings must be played back
using a wide screen (16x9 aspect ratio) TV or
the picture will appear distorted.
* If you add titles (see pages 47-49) while
recording in the Wide mode, they will appear
distorted when played back on a wide screen
(16x9 aspect ratio) TV.
41