Panasonic Palmcorder Palmsight PV-L858 - Page 44

Audio Sensitivity —
You can choose HIGH or LOW Audio sensitivity during Audio or MotioneAudio Security
recording. The Camcorder is set to [Meat the factory.
44
Before you begin...
+ Connect the Camcorder to a power source.
+ Insert a cassette with record tab (see page 12).
During Audio Security or Motion«Audio
Security stand-by mode (see page 43),
press UP A or DOWN Y to select
or (KT.
AUDIO
or
a aed MOTION*AUDIO
Camcorder is sensitive to sound
(normal conversation etc.) up to
approx. 32.8 feet (10m).
Camcorder is sensitive to sound
(normal conversation etc.) up to
approx. 3.28 feet (1m).
+ The Audio Sensitivity setting screen will
revert to Audio or MotioneAudio Security
stand-by mode after five seconds.
e The Audio Sensitivity setting will revert to
[el] when Palmcorder is turned off.
Note:
¢ Because the Audio Security feature may be
activated by surrounding natural noises, the
Camcorder should be placed in as quiet a
place as possible.
+ When setting the Audio sensitivity level, the
recording location should be taken into
consideration.
e The performance level may vary depending on
the spaciousness of the area used as well as
differences in noise reflection and resonance.
* A test should be done to confirm that perfor-
mance is satisfactory.