Panasonic Palmcorder PV-D308 - Setting the Clock

Setting the Clock |
Setting the clock is divided into four sections: Time Zone, Daylight Saving Time, Date
and Time, and Clock Battery. Follow instructions in the order presented.
Setting the Time Zone Before you begin...
* Connect the Camcorder to a power source.
The Camcorder is set to Eastern time * Set the POWER switch to CAMERA.
zone at the factory. If you live, or are Note:
traveling, in a different time zone, follow * When the POWER switch is set to VCR, the
the steps to select the appropriate time CLOCK SET menu will be displayed.
zone from the menu screen. * The Camcorders clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 16).
I Press the MENU button to display
the MENU mode. Press UP A or
DOWN Y repeatedly to select
CLOCK SET PB
CLOCK SET
SELECT: PUSH Y/A KEY
SET PUSH DISPLAY KEY
ENO : PUSH MENU KEY
2 Press the DISPLAY button to display
the CLOCK SET menu. Press UP A or
DOWN Y repeatedly to select
TIME ZONER
--- CLOCK SET ---
MINERS ; EASTERN
D. S. T. ; AUTO
DATE/TIME ; 12:00: 00AM
JAN 1 1908
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
END ;: PUSH MENU KEY
c) Press the DISPLAY button to display
the SELECT TIME ZONE menu. Press
UP A or DOWN Y repeatedly to
select desired time zone.
--- SELECT TIME ZONE - --
ATLANTIC PACIFIC
ALASKA
CENTRAL HAWAII
MOUNTAIN SAMOA
SELECT; PUSH V/A KEY
SET : PUSH DISPLAY KEY
A cis the DISPLAY button to fix the
Time Zone. The CLOCK SET menu
appears. Press the MENU button to
display the MENU.
When you travel outside the eight time zone :
chart above, please set the clock manually To exit from the MENU mode, press
(see page 16). the MENU button.