Panasonic PT-AE900E

ENGLISH-39
Useful functions
38-ENGLISH
NOTE:
B After saving the adjusted settings, the “PROFILE” setting will
automatically change to the setting saved in the “PROFILE SAVE”
menu. If you continue to adjust colours to make other profiles, change
the “PROFILE” setting to “NORMAL” manually.
B When the “COLOUR MANAGEMENT” menu is closed, or if the
“PROFILE” settings are changed before the adjusted colour settings have
been saved, the “PROFILE SAVE” confirmation screen will be displayed.
However, if you change the input signals, the adjusted colour settings will
not be saved.
LOG
Press the ENTER button to display the
“LOG” menu.
CHANGE
The adjustment menu (page 37 A) will
be displayed. You can adjust the colour
settings again.
DELETE
The selected colour setting will be deleted.
The confirmation screen will be
displayed when the ENTER button is
pressed. Select “OK” to delete the
settings.
Press the F or G button to select the
setting you want to adjust, and then
press the ENTER button to display the
selection screen.
To delete all the settings, select “ALL
DELETE”, and then press the ENTER
button. The confirmation screen will then
be displayed. Select “OK” and then
press the ENTER button. All the settings
in the “LOG” menu will be deleted, and
the “PROFILE” setting will return to
“NORMAL”.
NOTE:
B The projected image will be paused when the cursor is displayed.
Press the MENU button or the RETURN button on the remote control
unit to cancel the still image. (If an adjustment menu is displayed, press
the MENU button or the RETURN button twice.)
B When there are same or similar colours in the projected image, these
colours will also be changed.
B The colours white, gray and black cannot be adjusted.
B If the same colours are adjusted separately, these colours may not be
adjusted to suit your preference.
B You can adjust a maximum of 8 colours (“POINT.1-8”) for each user
(“USER1/2/3”). The cursor will not be displayed when 8 colours have
already been adjusted.
Selected
colour
Adjusted
colour
PROFILE SAVE
Press the ENTER button to display the
“PROFILE SAVE” menu.
Press the F or G button to select the
number (“USER1/2/3”) in which you
want to save the setting, and then press
the ENTER button. The confirmation
screen will then be displayed. Select
“OK” to save the setings.