Panasonic PT-CW240U - Powering ON;OFF; Connecting the Power Cord

30
- ENGLISH
Basic Operation
Powering ON/OFF
Basic Operation
Connecting the power cord
Make sure that the supplied power cord is securely xed to the projector to prevent removal of the power cord.
Installation
J
Insert the power cord holder in the holes 1 )
provided above and below the AC input
terminal.

Push the power cord holder to the left to allow
insertion of the power cord.
Connect the strap to power cable to prevent 2 )
missing the power code cover.
Attach the power cord cover to the cord in 3 )
the direction of (i) and press it rmly in the
direction of (ii).
Connect the power cord to the AC input 4 )
terminal.
Move the power cord holder to secure the 5 )
power cord.
Removal
J
Push the power cord holder to the left. 1 )
Remove the power cord from the AC input 2 )
terminal.
(i)
(ii)