EasyManua.ls Logo

Panasonic PT-D5500EL

Panasonic PT-D5500EL
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Specifications
PT-D5500E PT-D5500EL
Power supply AC 220 - 240~ V, 50 Hz/60 Hz
Power consumption 750 W (about 15 W in standby without fan running)
DLP
TM
panel
Panel size
Display system
Number of pixels
0.7 inch (aspect ratio 4:3)
DMD
TM
element, DLP type
786 432 pixels (1 024 x 768 dots)
Lens
Powered zoom
Powered focus control
1 to 1.36
F=1.7 to 2.0 f=25.6 to 33.8
Option
Projection lamp 2 bulbs x 300 W UHM lamp
Optical output
5 000 lm
1
Applicable scanning frequency
For video signal (S-video included)
For RGB signal
For DVI-D signal
For YP
BPR signal
Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz
Horizontally 15 kHz91 kHz, vertically 50 kHz85 kHz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency Less than 108 MHz
VGASXGA Dot clock frequency 108 MHz or less
[480i], horizontally 15.73 kHz, vertically 59.94 Hz
[480p], horizontally 31.5 kHz, vertically 59.94 Hz
[576i], horizontally 15.63 kHz, vertically 50 Hz
[576p], horizontally 31.25 kHz, vertically 50 Hz
[720/60p], horizontally 45 kHz, vertically 60 Hz
[1035/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/50i], horizontally 28.13 kHz, vertically 50 Hz
HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
Contrast ratio 1 600:1 (when HIGH is selected as the CONTRAST MODE setting)
Colour system 7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60)
Screen size 50 inch600 inch
Screen aspect ratio 4:3
Projection scheme Menu-selectable from front/rear/ceiling mount, and floor standing
Interface ports
RGB1 input terminal 1 set, BNC x 5
[For YPBPR input]
Y: 1.0 V[p-p] synchronization signal included,
PBPR: 0.7 V[p-p] 75 For G-SYNC: 1.0 V[p-p] 75
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically
adjusted
However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.
Model No.
1
These values are for the lens provided with the PT-D5500E. Note that these values change according to the
lens used.

Table of Contents

Related product manuals