Need help?Do you have a question about the Panasonic PT-D4000U and is the answer not in the manual?
General| Native aspect ratio | 4:3 |
|---|---|
| Projection distance | - m |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 15 - 91 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 1600:1 |
| Screen size compatibility | 50 - 600 \ |
| Projector native resolution | XGA (1024x768) |
| Lamp type | UHM |
| Lamp power | 210 W |
| Lamps quantity | 2 lamp(s) |
| Light source type | Lamp |
| Service life of light source | - h |
| Focal length range | 25.6 - 33.8 mm |
| Aperture range (F-F) | 1.7 - 2 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 1 |
| Wi-Fi | No |
| Power source | AC |
| AC input voltage | 120 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 15 W |
| Power consumption (typical) | 540 W |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Noise level | - dB |
| Dot clock scanning frequency | 150 MHz |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
Weight and Dimensions| Depth | 441 mm |
|---|---|
| Width | 530 mm |
| Height | 167 mm |
| Weight | 13700 g |
Covers essential warnings for fire, electric shock, and proper handling.
Details precautions for installation, operation, transport, and environmental factors.
Identifies remote control and projector parts, including terminals.
Covers projection schemes, geometry, distance calculation, and connection methods.
Guides on powering on/off, lens handling, and initial adjustments.
Explains menu navigation, picture, position, advanced, and option settings.
How to use test patterns and change the display language.
Configuring network settings and controlling the projector via a web browser.
Details PJLink commands and security authentication.
Using serial terminals and the REMOTE 2 terminal for control.
Covers lamp indicators, replacement, and air filter cleaning procedures.
Provides solutions for common projector issues and symptoms.
Lists detailed technical data, interface ports, and dimensions.
Information on trademarks, copyright, and product disposal guidelines.
To Next Page