Panasonic PT-D5700E - Removing the J-P.C.Board; Removing the Power Module

(3) Unscrew the 5 screws and remove the A-P.C.Board block.
(4) Pull out the flexible cable connected to the J-P.C.Board. (The
reverse side of A-P.C.Board)
(5) Unscrew the 10 screws and remove the A-P.C.Board. (The block
of the terminal metal fittings and J-P.C.Board remains.)
11.4. Removal of J-P.C.Board
(1) Remove the A-P.C.Board block according to the steps 1 through
3 in the section 11.3. "Removal of A-P.C.Board".
(2) Pull out the flexible cable connected to the A-P.C.Board.
(3) Unscrew the 8 screws and remove the J-P.C.Board.
11.5. Removal of Power Module
(1) Remove the A-P.C.Board block according to the steps 1 through
3 in the section 11.3. "Removal of A-P.C.Board".
(2) Unscrew the 1 screw and remove the power insulation sheet.
(3) Unscrew the 3 screws and release the 3 grounding terminals.
(4) Unscrew the 5 screws and remove the shield cover.
(5) Unscrew the 2 screws and remove the air-deriving sheet 1 (for
power).
24
PT-D5700U / PT-D5700E / PT-D5700UL / PT-D5700EL / PT-DW5100U / PT-DW5100E / PT-DW5100UL / PT-DW5100EL
All manuals and user guides at all-guides.com