(5) Unscrew the 3 screws and remove the synthesis mirror.
(6) Unscrew the 1 screws and remove the color wheel cover.
(7) Disconnect connectors and flexible cable from/to the color wheel
block.
(8) Unscrew the 1 screw and remove the color wheel block.
Note:
·
If the optical components (color wheel, rod in the analysis
block, etc.) become dirty or damaged, the performance
may be deteriorated. Work carefully enough in handling.
(9) Unscrew the 3 screws and remove the rod (complete).
Note:
·
Handle with care not to make dirty, damage or deform
the rod integrator or shading plate of the rod
(complete).
11.16. Removal of Full Reflection Mirror (complete)
(1) Remove the upper case according to the section 11.2. "Removal
of Upper Case".
(2) Unscrew the 2 screws and remove the CW fan fixing metal with
fan and the cooling plate.
36
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL
To Next Page
Loading...
