when no projector is around.
·
If you do not enter the 2 digits ID number within 5 seconds after the ID SET button has been pressed, the ID will remain
at the number that was set before the ID SET button was pressed.
·
Your specified ID will be erased if the batteries of the remote control are left exhausted. When the batteries are replaced,
set the same ID number again.
21
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
