Panasonic PT-EX500U

S P E C F I L E
PT-EX500/EX500L
LCD Projectors
As of July 2012
SFL12M008-2
8 / 1 5
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
• Distances calculated with the above equations will include a slight error.
minimum L (m) = (diagonal screen size in inches) × 0.025700 - 0.055800
maximum L (m) = (diagonal screen size in inches) × 0.035000 - 0.054000
minimum L (m) = (diagonal screen size in inches) × 0.033900 - 0.055300
maximum L (m) = (diagonal screen size in inches) × 0.057600 - 0.048000
minimum L (m) = (diagonal screen size in inches) × 0.057640 - 0.114200
maximum L (m) = (diagonal screen size in inches) × 0.094060 - 0.112900
minimum L (m) = (diagonal screen size in inches) × 0.094210 - 0.213200
maximum L (m) = (diagonal screen size in inches) × 0.149700 - 0.210900
(fixed focus) L (m) = (diagonal screen size in inches) × 0.016500 - 0.058500
ET-ELW20
Supplied lens
ET-ELT20
ET-ELT21
ET-ELW21
Aspect ratio 4:3
H
(Width of
projected image)
V
(Height of
projected image)
0.5V0.5V
0.1H0.1H
Standard postition
of projected image
360°
-10°
+10°
Shift range
Optical axis shift function allows to shift
the position of a projected image as
shown on the right.
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Horizontal direction
The projector may be installed at a horizontal
angle of ±10°.
• The ET-ELW21 is a fixed short-focus lens.
Therefore, the lens shift function provided in the
main unit cannot be used.