23
Previous
screen
Example of connection to a Personal Computer
System Configuration Example
Personal Computer
VGA Cable
PC Audio Cable (not included)
• When using the PC Plug & Play feature, first, attach the AC cord
to the LCD Projector and turn the projector power on. Then, turn
the PC power on.
• When LCD Projector power is turned off, turn the personal
computer off as well.
• Refer to the “Signals that can be Input” for types of RGB signals
which can be input to the projector by connecting a personal
computer.
Note
RGB/YPBPR IN
AUDIO IN
Downloaded From projector-manual.com Panasonic Manuals
To Next Page
Loading...
