48
Previous
screen
Adjusting the Picture to the Desired Setting
The items which can be adjusted will vary depending on the
type of input signal.
The adjustment procedure below describes the on-screen
displays when the S-VIDEO signal or the VIDEO signal is
being projected.
•Adjustment procedure (when adjusting the Color)
1 Press MENU to
display the menu.
3 Press or to
select “Color”.
4 Press or to
adjust the color.
• The current setting
will be displayed on
the screen by
numerals and a
bar.
Image Quality
Color
Tint
Brightness
Contrast
Sharpness
Standard (Push ENTER)
•Dynamic •Natural
0
0
0
0
0
Picture
Picture
White Balance
Video System
Function
Language
Information
2 Press or to
select “Picture”, and
then ENTER to
display the screen.
Continued on the next page...
Downloaded From projector-manual.com Panasonic Manuals
To Next Page
Loading...
