76
Previous
screen
Specifications
Active Matrix 4:3 Aspect Ratio panels, TFT (Thin Film
Transistor)
H/V separate, H/V composite, or Sync-on-Green
LCD panels
No. of pixels
Drive method
Projector lamp
Lens
Brightness
Contrast ratio
Screen size
No. of colours
Color systems
Lens axis shift
Projection (throw) distance
S-Video input signal
Video input signal
RGB/YP
BPR
input signal
V-Frequency
Sync signal
Video signal
H-Frequency
0.7″ Poly silicon LCD panel X 3,
RGB shutter method, using Translucent TN crystal panels
480 000 (800 X 600) stripe pixels X 3 panels
1-1.3 zoom lens, F2.3-2.6, f28 mm- 37 mm Manual Focus
130 W UHM Lamp
300 : 1
16 777 216
700 lumen / ANSI
PAL/SECAM/NTSC/PAL-M/PAL-N/NTSC4.43
1 V [p-p], sync negative, 75 Ω terminated
Y (luminance signal) : 1 V [p-p], sync negative, 75 Ω
terminated
C (chrominance signal) : burst 0.286 V [p-p], 75 Ω
terminated
RGB Analog (0.7 V [p-p], 1.0 V [p-p] with sync on green,
75 Ω)
YP
BPR (Y: 1.0 V [p-p], PB, PR: 0.7 V [p-p], 75 Ω)
24 KHz - 80 KHz (TTL Level)
50 Hz - 86 Hz (TTL Level)
Connectors S-Video Input: Mini Din 4-pin X 1
Video Input : RCA pin X 1
Audio Input: M3 stereo mini pin X 1
Serial Port (RS-232C): Mini Din 8-pin X 1
RGB/YP
BPR Input: D-Sub mini 15-pin X 1
6:1 Low position
30″ - 300″
1.6 m - 15.7 m
Audio out
0.5 W Mono
Audio input signal
0.32 V [rms]
Continued on the next page...
Downloaded From projector-manual.com Panasonic Manuals
To Next Page
Loading...
