Panasonic PT-RW620

Questions and Answers:

M
Michael PerrySep 2, 2025
What to do if no image appears on Panasonic Projector?
- M
  Michael YoungSep 2, 2025
  If no image appears on your Panasonic Projector, check the following: * Ensure connections to external devices are correctly performed. * Verify the input selection setting is correct. * Check that the [BRIGHTNESS] adjustment is not at a minimum. * Confirm the external device connected to the projector is working properly. * Ensure the shutter function is not in use. * Make sure the lens cover is not still attached to the lens. If the power indicator is blinking red, consult your dealer.
A
Alexis BerrySep 1, 2025
What to do if DVI-D image from computer does not appear on Panasonic PT-RW620?
- R
  Robert DavisSep 1, 2025
  If the image output from the DVI-D of your computer does not appear on the Panasonic Projector: * Verify that [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. * Updating the graphic accelerator driver of the computer to the latest version may improve the image. * Performing the [EDID SELECT] setting in [DVI-D IN] and then rebooting the computer may also help.
J
Justin MaldonadoAug 31, 2025
Why is my Panasonic PT-RW620 image not displaying correctly?
- A
  Alexandria KimAug 31, 2025
  If the image on your Panasonic Projector is not displaying correctly, check the following: * Ensure that [SYSTEM SELECTOR] is set properly. * Verify that [RGB1 INPUT SETTING] is set correctly. * Check for problems with the video tape or other image sources. * Confirm that a signal compatible with the projector is being input.
C
Cameron HughesAug 30, 2025
What to do if DIGITAL LINK input image is not displayed on Panasonic PT-RW620?
- N
  Nicholas WhitneyAug 30, 2025
  If the DIGITAL LINK input image is not displayed on your Panasonic Projector, consider the following: * Ensure the cable is compatible with the projector's condition. * Verify that the connections between the twisted-pair-cable transmitter and external device, and between the transmitter and projector, are correctly done. * Check if [DIGITAL LINK MODE] is set to [AUTO] or [DIGITAL LINK], and not [ETHERNET]. * Confirm that the input signal is compatible with the twisted-pair-cable transmitter.
J
John LambAug 29, 2025
What to do if HDMI video doesn't appear correctly on Panasonic Projector?
- A
  Amanda GreeneAug 29, 2025
  If the video from an HDMI compatible device does not appear or appears jumbled on your Panasonic Projector: * Ensure the HDMI cable is connected securely. * Try turning the power of both the projector and the external device off and on again. * Verify that the input signal is compatible with the projector.
J
Jason YoungAug 28, 2025
What to do if image from computer does not appear on Panasonic Projector?
- R
  Rebecca DunnAug 28, 2025
  If the image from your computer is not appearing on the Panasonic Projector, consider the following: * Check if the cable is too long. For D-Sub cables, the length should be 10 m (32'10") or shorter. * Verify that the external video output on the laptop is set correctly. (For example, the external output settings may be switched by pressing the “Fn” + “F3” keys or the “Fn” + “F10” keys simultaneously. This varies depending on the computer model. Refer to your computer's user manual.)
E
Eric SchneiderAug 27, 2025
Why is my Panasonic Projector remote control not responding?
- A
  Amy MillerAug 27, 2025
  If the remote control for your Panasonic Projector is not responding, try these steps: * Replace the batteries, as they may be depleted. * Ensure the batteries are inserted with the correct polarity. * Remove any obstructions between the remote and the projector's signal receiver. * Make sure you are within the remote's effective operating range. * Check for other light sources, like fluorescent lights, that might interfere with the projection. * Confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE]. * Verify if the terminal is being used for contact control. * Ensure the ID number setting operation is correct.
J
John GrantAug 26, 2025
What to do if my Panasonic Projector has no image?
- A
  anthonypaulaAug 27, 2025
  If no image appears on your Panasonic Projector, consider the following: * Check if the connections to external devices are correctly performed. * Ensure the input selection setting is correct. * Verify that the [BRIGHTNESS] adjustment is not at its minimum. * Confirm the external device connected to the projector is working properly. * Check if the shutter function is in use. * Make sure the lens cover is removed from the lens. If the power indicator is blinking in red, consult your dealer.
M
Misty JohnsonAug 25, 2025
Why Panasonic PT-RW620 Projector remote control does not respond?
- H
  harcherAug 26, 2025
  If the remote control for your Panasonic Projector isn't responding, consider the following: 1. Check if the batteries are depleted and replace them if necessary. 2. Ensure the batteries are inserted with the correct polarity. 3. Make sure there are no obstructions between the remote control and the projector's signal receiver. 4. Verify the remote control is within its effective operating range. 5. Check if other light sources, like fluorescent lights, are interfering with the projection. 6. Confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE]. 7. Verify that the terminal is not being used for contact control. 8. Ensure the ID number setting operation is correct.
S
Sandra AndersenAug 25, 2025
How to fix Panasonic Projector when power does not turn on?
- M
  Mrs. Marissa BlackAug 25, 2025
  If your Panasonic Projector isn't powering on, try these steps: * Ensure the power plug is firmly inserted into the outlet. * Check that the switch is not set to . * Verify the wall outlet is supplying electricity. * See if the circuit breakers have tripped. * Check if the light source indicators / are blinking. * Check if the temperature indicator is lit or blinking.

Panasonic PT-RW620 Specifications

General

Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	3 W
Power consumption (typical)	700 W
Matrix size	0.65 \
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	10000:1
Screen size compatibility	50 - 600 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-40 - 40 °
Keystone correction, horizontal	-15 - 15 °
Lamps quantity	1 lamp(s)
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	24000 h
3D	-
Supported video modes	480i, 525i, 576i, 625i, 720p, 1080i, 1080p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 800
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	35 dB
RS-232 ports	3
Number of bulbs	1 bulb(s)
Ethernet LAN data rates	10, 100 Mbit/s
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 80 %
Focal length range	- mm