To Next PageTo Next PageWhy video from HDMI compatible device does not appear or it appears jumbled on Panasonic Projector?
If video from an HDMI device is not appearing or is jumbled, ensure the HDMI cable is securely connected. Try turning the power of both the projector and the external device off and on. Also, verify that the input signal is compatible with the projector.
Why the DIGITAL LINK input image is not displayed on Panasonic Projector?
If the DIGITAL LINK input image isn't displayed, ensure the cable is compatible with the projector's condition. Check the connections between the twisted-pair-cable transmitter and external device, and between the transmitter and projector. Verify that [DIGITAL LINK MODE] is set to [AUTO] or [DIGITAL LINK], and not [ETHERNET]. Also, confirm that a compatible signal is being input to the twisted-pair-cable transmitter.
Why is the color pale on my Panasonic Projector?
If the color appears pale or grayish, first check if the [COLOR] and [TINT] settings are adjusted correctly. Ensure the external device connected to the projector is also adjusted correctly. Finally, inspect the computer cable for any damage.
Why Panasonic PT-RW930 Projector lens shift cannot be adjusted?
If the lens shift cannot be adjusted, try performing [LENS CALIBRATION]. Check to see if the Fixed-focus Lens (Model No.: ET-DLE055) is attached.
How to control the Panasonic PT-RW930 with Art-Net?
To control the projector with Art-Net, ensure the connections between the twisted-pair-cable transmitter and external device, and between the transmitter and projector, are correct. Verify that [Art-Net SETUP] is set to something other than [OFF]. Also, confirm that [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] are set correctly.
General| Contrast Ratio | 20, 000:1 |
|---|---|
| Light Source | Laser |
| Light Source Life | 20, 000 hours |
| Projection Size | 50 - 600 inches |
| Resolution | WUXGA (1920 x 1200) |
| Connectivity | HDMI, DVI-D |
| Technology | DLP |
Essential safety guidelines covering general handling, transport, installation, and environmental factors.
Procedures for powering the projector on and off safely, including indicator status.
Detailed adjustments for picture quality including mode, contrast, brightness, color, and sharpness.
Adjustments for image position, aspect ratio, zoom, geometry, and lens shift.
Configuration options for projector ID, projection method, operation settings, and startup behavior.
A guide to diagnosing and resolving common projector problems.
Interpreting self-test error codes and understanding recommended measures.
Detailed technical specifications including power, dimensions, light output, and contrast.
