This document outlines the operating instructions and functional manual for Panasonic DLP™ Projectors, specifically models PT-RZ470UK, PT-RZ470UW, PT-RW430UK, and PT-RW430UW, intended for commercial use. It covers setup, basic operations, settings, maintenance, and technical specifications.
Function Description
These Panasonic projectors are designed for high-performance commercial use, offering advanced features for flexible setup and long-term reliability. They support 3D projection using both VESA standard IR and DLP Link systems, making them versatile for various applications. The projectors incorporate a hybrid light source (LED/laser diode) to ensure extended operational life and consistent brightness. Digital Link technology allows for the transmission of video, audio, Ethernet, and serial control signals over a single twisted-pair cable, simplifying installation and connectivity. The projectors also feature an ECO management function to optimize light source power based on ambient brightness, input signals, and video mute status, contributing to energy conservation. For multi-screen setups, edge blending and multiple-projector brightness control functions are integrated, enabling seamless large-scale displays.
Important Technical Specifications
- Model Numbers: PT-RZ470UK, PT-RZ470UW, PT-RW430UK, PT-RW430UW
- Power Supply: AC 100 V - 240 V, 50 Hz/60 Hz
- Power Consumption: 460 W (5.2 A - 2.0 A). Standby mode consumes 0.5 W (ECO) or 8 W (NORMAL).
- DLP Chip: 1-unit DLP chip.
- PT-RZ470UK/UW: 16.5 mm (0.65") aspect ratio 16:9, 2,073,600 pixels (1920 x 1080 dots).
- PT-RW430UK/UW: 16.5 mm (0.65") aspect ratio 16:10, 1,024,000 pixels (1280 x 800 dots).
- Projection Lens:
- Zoom: 1.5 to 2.9:1 (PT-RZ470UK/UW), 1.5 to 3.1:1 (PT-RW430UK/UW).
- Focus: F = 2.0 to 3.4, f = 21.5 mm to 43.0 mm.
- Light Source: Hybrid light source (LED/laser diode). Estimated life of approximately 20,000 hours until luminance decreases by half.
- Light Output: 3,500 lm (ANSI).
- Contrast Ratio: 20,000:1.
- Applicable Scanning Frequencies:
- Video Signal: Horizontal 15.75 kHz/15.63 kHz, Vertical 50 Hz/60 Hz.
- RGB Signal: Horizontal 15 kHz to 100 kHz, Vertical 24 Hz to 120 Hz. Dot clock frequency 162 MHz or lower.
- DVI-D/HDMI Signal: Supports various resolutions from 525p (480p) to WUXGA (non-interlaced), with dot clock frequencies from 25 MHz to 162 MHz.
- Terminals:
- COMPUTER IN: D-Sub 15p (female) for RGB/YCBCR/YPBPR signals.
- DVI-I IN: DVI-I 29p for digital (DVI 1.0, HDCP) and analog (RGB/YCBCR/YPBPR) signals.
- HDMI IN: HDMI 19pin (HDCP, Deep Color compatible) for HDMI signals and Linear PCM audio.
- VIDEO IN: Pin jack for video signals.
- AUDIO IN: M3 stereo mini jack for audio signals.
- VARIABLE AUDIO OUT: M3 stereo mini jack for audio output.
- SERIAL IN: D-Sub 9p for RS-232C control.
- DIGITAL LINK/LAN: RJ-45 for network, Digital Link connection, PJLink compatible, 100Base-TX.
- 3D SYNC: Mini DIN 3p for 3D IR transmitter connection.
- Dimensions (W x H x D):
- 455 mm (17-29/32") x 137 mm (5-13/32") (with minimum feet length) x 415 mm (16-11/32") (including lens).
- Weight: Approx. 11 kg (24.3 lbs.).
- Noise Level: 35 dB (NORMAL), 29 dB (LOW).
- Operating Environment: Temperature 0 °C (32 °F) to 45 °C (113 °F), Humidity 20% to 80% (no condensation). For high altitudes (1400m-2700m), temperature 0 °C (32 °F) to 40 °C (104 °F).
Usage Features
- Flexible Setup: Supports 2x zoom lens, wide lens shift, and portrait setting. DIGITAL LINK support enhances setup flexibility.
- Initial Settings: Guides users through initial language and projector setup upon first power-on or after initialization.
- Input Selection: Allows switching between various input signals (COMPUTER, DVI-I, VIDEO, DIGITAL LINK, HDMI) via remote control or control panel.
- Automatic Setup: Automatically adjusts resolution, clock phase, and image position for analog RGB and DVI-D/HDMI signals.
- Image Adjustment: Offers comprehensive controls for contrast, brightness, color, tint, color temperature, sharpness, noise reduction, and aspect ratio. Lens shift, zoom, and focus rings provide precise image positioning and sizing. Keystone correction is available for tilted installations.
- 3D Viewing: Compatible with active shutter system 3D eyewear (DLP Link and VESA standard IR). Users can select 3D modes, adjust 3D sync output delay, and swap left/right images for optimal viewing.
- ECO Management: Features [LIGHT POWER] settings (NORMAL, ECO SAVE1, ECO SAVE2, LOW) to reduce power consumption. [AUTO POWER SAVE] includes ambient light detection, signal detection, and AV mute detection. [NO SIGNAL SHUT-OFF] automatically switches to standby after a set period without input.
- Network Control: Supports PJLink protocol, web control, Crestron RoomView, AMX D.D., and Extron XTP for remote monitoring and control over a LAN. Allows for setting IP address, subnet mask, default gateway, and DNS servers.
- E-mail Notifications: Can be configured to send E-mail alerts for errors or temperature warnings, and periodic reports.
- Security Features: Includes security password, menu lock, and control device setup to enable/disable button operations on the control panel and remote control.
- Schedule Function: Allows scheduling of commands (e.g., power on/off, input switching, light power) for specific days and times.
- Sub Memory List: Registers multiple image adjustment data for different signals, allowing quick recall of preferred settings.
Maintenance Features
- Indicator Status: Light source () and temperature () indicators provide visual cues for internal problems, guiding users to appropriate troubleshooting steps.
- Regular Cleaning: Instructions for wiping the outer case and lens front surface with a soft, dry cloth. Emphasizes avoiding harsh chemicals and excessive force.
- Internal Cleaning: Recommends professional internal cleaning by a dealer every 20,000 hours of usage or sooner in dusty environments.
- Light Source Replacement: Advises contacting a dealer for light source unit replacement if it goes off or brightness noticeably reduces.
- Battery Replacement: Reminds users to replace depleted batteries in the remote control promptly to prevent leakage or explosion.
- Password Management: Encourages periodic password changes for security and provides a method to initialize passwords if lost.
- Error Information Page: Provides detailed error messages and suggested measures to take when problems occur, accessible via web browser.
To Next Page
Need help?
General