Panasonic PT-VX400NTU Specification

S P E C F I L E
Product Number : PT-VX400NT
Pro d u c t Na m e : LCD Projector
As of October 2011. Specifications and appearance are subject to change without notice.
SFL11M019
1 / 1 3

Panasonic PT-VX400NTU Specifications

General

Matrix size	0.63 \
Matrix type	3-panel (p-Si TFT active)
Projection distance	0.76 - 7.62 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3
RS-232 ports	1
Focus	Manual
Throw ratio	1.2 - 1.9:1
Focal length range	15.47 - 24.53 mm
Aperture range (F-F)	1.65 - 2.33
Lamp type	-
Lamp power	245 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	- h
HDCP	Yes
Noise level	35 dB
Noise level (economic mode)	29 dB
Dot clock scanning frequency	162 MHz
Full HD	No
Supported video modes	1080i, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 640 x 480 (VGA)
RMS rated power	10 W
USB connector type	USB Type-A, USB Type-B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Placement	Desktop
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.48 W
Power consumption (typical)	322 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, VGA

Weight and Dimensions

Depth	276.8 mm
Width	350.5 mm
Height	96.5 mm
Weight	3500 g