Need help?Do you have a question about the Panasonic PT-VX400NTU and is the answer not in the manual?
General| Matrix size | 0.63 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Projection distance | 0.76 - 7.62 m |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 15 - 80 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Aspect ratio | 4:3 |
| RS-232 ports | 1 |
| Focus | Manual |
| Throw ratio | 1.2 - 1.9:1 |
| Focal length range | 15.47 - 24.53 mm |
| Aperture range (F-F) | 1.65 - 2.33 |
| Lamp type | - |
| Lamp power | 245 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | - h |
| HDCP | Yes |
| Noise level | 35 dB |
| Noise level (economic mode) | 29 dB |
| Dot clock scanning frequency | 162 MHz |
| Full HD | No |
| Supported video modes | 1080i, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 640 x 480 (VGA) |
| RMS rated power | 10 W |
| USB connector type | USB Type-A, USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.48 W |
| Power consumption (typical) | 322 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 276.8 mm |
|---|---|
| Width | 350.5 mm |
| Height | 96.5 mm |
| Weight | 3500 g |
To Next Page
