Panasonic PT-VX400NTU

10-Watt Speakers and a Microphone Input
Enables Audio Playback Directly from the
Projector
These portable projectors feature
high-output 10-watt speakers that
produce a high sound volume
without requiring external
speakers. They also feature a
microphone input terminal that
allows microphone sounds to
be output from the projector.
These features make
presentations even more
effective.
Top-Panel Lamp Replacement
Simplifies Maintenance
The lamp can be reached through the
top panel for easy replacement. This
eliminates the need to detach the
projector from its ceiling bracket and
greatly simplifies maintenance.
Direct Power Off Function - Unplug the Power
Cord Immediately After Use
The Direct Power Off function keeps the
cooling fan turned on even when you
unplug the power cord right after use.
This lets you put everything away and
carry the projector quickly to your next
presentation or lecture.
Convenient Carrying Bag
A carrying bag with a handy shoulder strap comes
with the projector. This bag helps protect the
projector from impacts.
HDMI Input Terminal and Abundant Interfaces
Extensive interfaces include an HDMI input terminal, 2 sets of computer (RGB)
input terminals, a wired LAN terminal, and a serial (RS-232C) terminal for
external control. These features support a wide range of system architectures
for portable or ceiling-mounted use.
Easy Remote Monitoring and Control over a LAN
A web browser on a computer connected through a wired LAN*
15
system lets
you remotely operate projectors and check their status. An e-mail messaging
function can also notify you when a lamp needs replacement, and indicate the
overall projector status. In addition, Multi Projector Monitoring and Control
Software is available for monitoring and controlling multiple Panasonic
projectors from a single PC. The wired LAN terminal is compatible with PJLink™
(class1), an open protocol that is used by many manufacturers, to enable
integrated control of systems that contain different brands of projectors.
Side-by-Side and P-in-P Function*
16
(PT-VW330)
for Effective Presentations and Lectures
Two different image sources can be simultaneously displayed onto a single
screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a
sub-window onto the main screen. The sub-window can be positioned at any of
the four corners (upper left, upper right, lower left, lower right) to expand the
usable area as only a wide-screen projector can do.
Side-by-Side Mode P-in-P Mode
Basic concept of
the Multi Projector
Monitoring and
Control Software
Effective theft prevention with the startup logo*•
17
Projector identification system for remote control allocation of up to six •
projectors
The Wireless Mouse function (PT-VX400NT only) enables you to operate a •
computer’s mouse pointer by the projector’s wireless remote control
Built-in closed caption decoder•
Other Features
Auditorium
Lecture room
Seminar room
Classroom
VW330 VX400NT VX400
VW330
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
*15 The PT-VX400NT also supports a wireless LAN system. *16 This function is not effective for some source combinations. *17 The included Logo Transfer Software is required to upload a new logo.
*18 Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
* Featured image: PT-VX400NT.
* The PT-VW300/VX400 are not equipped with USB A/USB B terminals.
No halogenated flame retardants are used in the cabinet.•
Lead-free glass is used for the lens.•
Lamp power switching further reduces power consumption.•
Standby power consumption of only 0.48 W*•
18
has been achieved.
RoHS compliant•
Ecology-Conscious Design