To Next PageTo Next PageHow to fix picture from a computer that does not appear on my Panasonic Projector?
If the picture from a computer isn't appearing on your Panasonic Projector, ensure that you are using an appropriate length cable. Check the external video output settings on the laptop.
General| Power source | AC |
|---|---|
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 290 W |
| Display aspect ratio | 16:9 |
| Projection technology | LCD |
| Supported aspect ratios | 4:3 |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -45 - 45 ° |
| Keystone correction, horizontal | -30 - 30 ° |
| Focus | Manual |
| Throw ratio | 1.2 - 1.9:1 |
| Zoom capability | Yes |
| Focal length range | 15.3 - 24.64 mm |
| Aperture range (F-F) | 1.6 - 2.12 |
| Lamp power | 230 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 7000 h |
| DVI port | No |
| Noise level | 37 dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 10 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| 3D | - |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Cable lock slot type | Kensington |
Weight and Dimensions| Depth | 279.4 mm |
|---|---|
| Width | 352 mm |
| Height | 98 mm |
| Weight | 3300 g |
Covers earthing, fire/shock hazards, moisture, and proper usage warnings.
Details safe practices for batteries, lens, and lamp unit replacement.
Explains installation modes, ceiling mount options, screen sizing, and adjustable feet.
Covers power connection, indicators, initial setup, powering on/off, and direct power off.
Explains lamp/warning indicators, their meanings, and a guide to common problems.
Covers cleaning, air filter replacement, lamp unit replacement, and filter counter reset.
