7.2. MECHANICAL ADJUSTMENT
Refer to the Service Manual for R4-Mechanism Chassis. (Order No. MKE0401000C1)
7.3. ELECTRICAL ADJUSTMENT
Note:
Following Adjustments have been preadjusted at factory and are not required.
- Purity Adjustment
- Convergence Adjustment
7.3.1. TEST EQUIPMENT
To do all of these electrical adjustments, the following equipment is required.
1. Dual-Trace Oscilloscope
Voltage Range: 0.001 V to 50 V/Div.
33
To Next Page
Loading...
