7.3.4. EVR ADJUSTMENT ITEM
The following Items need to be adjusted for EVR adjustment.
- SUB CONTRAST ADJUSTMENT
- FOCUS, SCREEN, CUT OFF, DRIVE ADJUSTMENT
- SUB COLOR/SUB TINT ADJUSTMENT
- DEFLECTION DISTORTION CORRECTION ADJUSTMENT
- WHITE BALANCE ADJUSTMENT
- SUB BRIGHTNESS ADJUSTMENT
7.3.5. HOW TO ENTER EVR ADJUSTMENT MODE
Press and hold STOP/EJECT, PLAY/REPEAT and VOL- buttons of VCR operation panel on the
unit together over 5 seconds with no cassette inserted.
The adjustment overlay will appear to Enter EVR adjustment mode.
Fig. E2-1
7.3.5.1. How to adjust:
1. Press UP/DOWN key on the remote control to select
control function to be adjusted.
Important Note:
Make a note of the original value of the controls before modifying
in case the wrong control is adjusted.
35
To Next Page
Loading...
