EasyManua.ls Logo

Panasonic PV-DV102 - Quick Guide (Continued); Insert Memory Card (Optional)*; SD Memory Card write protection switch; About the M-CARD Lock Switch

Panasonic PV-DV102
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Insert Memory Card (Optional)*
3 Insert the Memory Card and hold
in place until you hear a click.
4 Close the M-CARD Door.
2 Slide DOOR OPEN to open
M-CARD door.
1 Set POWER to OFF.
Before you begin
Charge the Battery. (p. 13)
*Memory Card: MultiMediaCard or SD Memory Card (p. 91)
Be sure to insert the Memory Card before using the Card PhotoShot. (p. 47)
Below is a list of memory cards which can be used in this Palmcorder.
Memory Card
MultiMediaCard (SanDisk brand)
SD Memory Card (optional) (p. 89)
Capacity
8 MB, 16 MB
8 MB, 16 MB, 32 MB, 64 MB
SD Memory Card write protection switch
A write protection switch is located on the SD Memory Card. Sliding the
switch to the LOCK position prevents writing on or formatting the card.
Write protection Switch
To remove the Memory Card...
Press here to eject the card.
About the M-CARD Lock
Switch
Note
By sliding M-CARD Lock to LOCK, you
can prevent POWER from accidentally
entering the M-CARD position when
changing POWER to CAMERA.
M-CARD Lock
POWER
cropped corner
Note
When inserting the Memory Card, insert
with the cropped corner down as shown in
the illustration above.
When inserting the Memory
Card
Quick Guide
DV102.p 10-13.p65 02/03/05, 12:5612

Table of Contents

Other manuals for Panasonic PV-DV102

Related product manuals