Panasonic PV-DV102 - Transferring Your Images (Macintosh); System Requirements (for Built-in SD Drive); Connection

87
PC Connection
Transferring Your Images (Macintosh)
You can transfer images from your Palmcorder tape to your Macintosh.
• Mac OS 9.0~9.1
• iMac, iBook or Power Macintosh
®
G3 with
USB port or Power Mac
™
G4
• RAM: 64 MB or more
System Requirements
(for Built-in SD Drive)
• CD-ROM drive (for installation)
• USB Port
• Mouse or other pointing device
* Even if system requirements are met, there is no guarantee that the included software
will work on all personal computers.
Connection
3
2
USB Terminal
USB Terminal
1 Turn on your PC.
2 Set the Palmcorder POWER to M-CARD.
3 Connect the Palmcorder to your Macintosh using the USB Cable (supplied).
• For extended use, it is recommended to use the AC Adaptor as a power source.
USB Cable
(supplied)
Note
DV102.p 87-88.p65 02/03/05, 13:0087