8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before Using
To operate Camera functions:
Set POWER to CAMERA.
To operate VCR functions:
Set POWER to VCR.
You can operate the major functions of your Palmcorder from up to approximately 5 m
(16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder
and press the desired buttons (Remote Sensor is located under the lens).
Remote Control (Optional)
○○○○
Remote Sensor
Controlled Functions
• Rec/Pause (p. 17)
• Tele (Zoom) (p. 20)
• Wide (Zoom) (p. 20)
• Date/Time (p. 108)
• Reset (p. 44)
• PhotoShot (p. 19)
• Display On TV (p. 38)
• Counter/Time Code (p. 109)
• Audio Dubbing (p. 43)
• Record (p. 46)
• Menu (p. 16)
• Play (p. 31)
• FF/Search (p. 33)
• REW/Search (p. 33)
• Pause/Select (pp. 15, 16, 35)
• Stop/Set (pp. 15, 16, 31, 46)
• Slow/Frame Advance (Forward)
(pp. 34, 35)
• Slow/Frame Advance (Backward)
(pp. 34, 35)
• Index Search (Forward) (pp. 35, 36)
• Index Search (Backward) (pp. 35, 36)
• Speaker Volume (p. 32)
1 Hold down LIGHT for more than 0.7
seconds to turn ON or OFF.
•“ ” will appear on the screen.
To brighten the natural colors in a scene.
Using the Built-in Light
Caution
This light becomes hot during operation.
Make sure nothing covers the light during
operation.
• Using Light reduces battery time.
• Provide adequate ventilation if using
Light in a hot environment for a long time.
• Set LIGHT to OFF when not in use.
• When replacing the bulb, see page 91.
Built-in Light
Note
Before you begin
• Connect the Palmcorder to a power
source. (pp. 13, 14)
• Set POWER to CAMERA or M-CARD.
1LIGHT
DV102.p 5-9.p65 02/03/05, 12:568
To Next Page
Loading...
