53
Card Features
Card (Optional) Features
DPOF Setting
You can select the images to be printed,
the number of prints, and other
print-related information (DPOF setting) on
a Memory Card. “DPOF” stands for Digital
Print Order Format, and since printing data
can be added to images on the Memory
Card, the Memory Card can be used with
any system that provides DPOF.
Before you begin
• Set POWER to OFF before inserting a
recorded Memory Card. (pp. 47, 48)
1 Do steps 1 and 2 on page 50.
2 Press MENU to display the CARD
SETTING menu screen.
3 Rotate JOG KEY to select DPOF , then
press JOG KEY to select ON.
4 Rotate JOG KEY to select VARIABLE ,
then press JOG KEY to select ON.
• DPOF SETTING menu screen is
displayed on the screen.
5 Rotate and press JOG KEY to select
the picture.
• The selected image is underlined in
green
• The cursor moves to “D-000”.
6 Rotate and press JOG KEY to set the
number of prints.
• The “
” mark is displayed.
The “ ” mark indicates pictures for
which 1 or more prints have been set.
• When printing one each of all the
pictures, select “ALL1”; if not all the
pictures are printed, select “ALL0”.
7 Repeat steps 5 and 6 to set the other
pictures.
VARIABLE:
You can select images recorded on the
Memory Card and set the number of prints
desired.
ALL1:
The number of prints recorded on the
Memory Card is collectively set to 1.
ALL0:
The currently set number of prints is set
to 0.
Print mark is based on DPOF (Digital Print Order Format).
3, 4, 5, 6
JOG KEY
2MENU
DV102.p 51-53.p65 02/03/05, 12:5853
To Next Page
Loading...
Need help?
General