Panasonic RAMSA WP-1400

CONNECTIONS
For 1 input: [BRIDGE]
• WP-1200
INPUT [A]
Speaker
For 2 Inputs : [STEREO]
CAUTIONS ;
• Connect the speakers after selecting either bridge or
stereo.
• When using bridge connection, never connect the
speakers between + and — of A CH or B CH.
WP-1400
INPUT (A]
Speaker
■ Connection of Plugs and Connectors :
1. Input connector {3-pin XLR-type female connector)
2. Tip-ring-sleeve phone plug
C (cold) H (hot)
input terminal
No.l
ground
No.2
2 hot
No,3
cold
[Male]
Hot
C (cold)
Ground H (hot)
on
Cold Solder Ete'doodI
Shielding wire
- 5 -