1. Check that nothing is under the
legrest and that air is being released.
AFTER COMPLETING THE MASSAGE
Return the Seat to the Original Position
Disconnect the Power
2. Always return the legrest to its original
length if it has been slid out.
3. Press twice to return the chair
to the upright position.
4. If the pillow or back cushion has been
flipped back or the control panel has
been removed from its stand, return
them to their original positions.
1. Slide the power switch to the
“off” position.
2. Turn the lock switch key to the
“lock” position.
* Remove key and store out of reach of
children.
3. Unplug the power cord.