Volume control VR.
- DC voltage measurements are taken with electronics voltmeter.
The negative terminal of the battery provides negative meter
connection point.
No mark.........
FM
( ).....................
AM
- Battery current:
Vol. min................
FM: 8.8mA (DC) / 3.9mA (AC)
AM: 6.0mA (DC) / 3.7mA (AC)
Vol. max...............
FM: 210mA (DC) / 7.8mA (AC)
AM: 200mA (DC) / 7.6mA (AC)
Measurement instruction
AM:
74dB/m, 30% Mod.
FM:
60dB, 30% Mod.
- Important safety notice
Components identified by mark have special characteristics
importan for safety. / When replacing any of these components,
use only manufacturer’s specified parts.
- This shematic diagram may be modified at any time with the
development of new technology.
3.2. Schematic Diagram
4. Printed Circuit Boards
5. Measurements and Adjustment
5.1. ALIGNMENT INSTRUCTIONS
9
To Next Page
Loading...
