Panasonic RQ-V190 - Page 14

■ Memory scan
Once the stations have been preset, the pro¬
grams of each of those stations can be heard for
several seconds in turn simply by pressing the
memory scan button. This function comes in
handy for checking out what kind of broadcasts
are now being beamed by the memory channels
(1-4).
1. Press the memory select/scan button for
more than 1 second.
The channel will flash and change in order
1—>2—>3->4—> 1 to play each channel for ab¬
out a few seconds.
2. When your desired memory channel is dis¬
played, press the memory select/scan but¬
ton once again.
The previous station will be cleared when the new
station is stored into the same memory channel.
■ How to skip unnecessary memory
channel number(s)
You can skip the unnecessary memory channel
number(s) at your convenience.
(EX. 1-»2-+3 ™ »4)
i_i g
cleared
1. Turn on the radio and recall the memory
channel to be cleared.
2. Press the memory button.
The memory indicator will flash on and off for
10 seconds. }
3. While the memory indicator flashes on and
off, press both of the tuning buttons (4- and
-) at the same time.
The frequency display will disappear and
"-” will appear instead.
4. Press the memory button.
(Three beeps will be emitted)