“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of
the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note :
When the protection circuitry functions, the unit will not operate unless the power is first turned
off and then on again.
3. Accessories
Remote Control Transmitter
FM indoor antenna (EG)
FM indoor antenna (E, EB)
AC mains lead (E, EG)
AC mains lead (EB)
AM Loop antenna
To Next Page
Loading...
