To Next PageTo Next Page
Need help?Do you have a question about the Panasonic SA-AK630EE and is the answer not in the manual?
General| Brand | Panasonic |
|---|---|
| Model | SA-AK630EE |
| Category | Stereo System |
| Language | English |
Details on RMS output power, THD, and frequency response for amplifier channels.
Specifications for cassette deck performance including track system, heads, motor, and tape speed.
Technical details for FM/AM tuner, preset stations, frequency range, and sensitivity.
Specifications for CD playback, including supported disc types, bit rates, and sampling frequencies.
Procedure to clear all error codes displayed on the unit.
Lists abnormalities and error displays for the deck mechanism block.
Lists abnormalities and error displays for the CD/Changer block.
Details on detecting errors related to the power supply system.
Describes error codes for the CR20 mechanism, including reset conditions and error tables.
Schematic diagram of the optical pickup and CD servo control circuit.
Block diagram illustrating the microcomputer, servo processor, and digital signal processing components.
Schematic of the optical pickup, laser diode, and laser power drive circuit.
Diagram of the servo processor, digital signal processor, and digital filter/D/A converter.
Schematic of the FM/AM IF amplifier, mixer, MPX, and PLL frequency synthesizer.
Diagram of the microprocessor, FL driver, motor drive, and associated control circuits.
Circuitry for audio sound processing and dual op-amps for AGC, HPF, and muting control.
Circuitry for subwoofer level control and fan motor drive.
Circuitry for op-amps, muting control, and various switching functions.
Detailed connections and interface lines for the microprocessor.
Schematic for tape playback EQ, record amplifier, ALC, and TPS amplifier.
Circuitry for deck motor switching and photo interrupter sensors.
Circuitry for deck motor switching and photo interrupter sensors.
Schematic of power HICs, voltage regulators, and headphone output stage.
Circuitry for DC detection, muting control, and current limiters.
Tables detailing voltage measurements for various ICs across different operating modes.
Schematic of front panel buttons, jog dial, LED indicators, and headphone jack.
Diagram showing the FL display driver IC and its interface with the microprocessor.
Schematic of the power transformer, AC inlet, and voltage regulator circuits.
Schematics for CD detect, spindle position sensing, and CD loading mechanism control.
Diagram of the sub-power circuit, including its connections to the main power supply.
Schematic for tape PB EQ, record amp, ALC, TPS amp, and REC/PB switch.
Circuitry for bias oscillator control and record/playback head select.
Visual identification and part numbers for various ICs and transistors used in the unit.
Visual identification and part numbers for various diodes used in the unit.
Detailed pin descriptions for the IC7002 Servo Processor.
Detailed pin descriptions for the IC7003 Focus/Tracking/Motor Drive IC.
Detailed pin descriptions for the IC2801 Microprocessor.
Further pin descriptions for the IC2801 Microprocessor.
List of part numbers and names for cassette deck mechanical components.
List of part numbers and names for CD loading mechanism mechanical components.
List of integrated circuit part numbers and their types.
List of transistor part numbers and their types.
List of diode and switch part numbers.
List of connector and resistor part numbers.
Comprehensive list of resistor part numbers, values, and types.
Detailed list of capacitor part numbers, values, and voltage ratings.
List of materials used for packing the unit.
List of included accessories such as remote control and cables.
