Panasonic SA-AKX30PH - Disassembly of Rear Panel

53
9.23. Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Tuner P.C.B.”.
Step 1 Remove 7 screws (For PH only).
Step 1 Remove 6 screws (For PN only).
Step 2 Detach Voltage Selector P.C.B. from Rear Panel as
arrow shown (For PH only).
Step 3 Lift up SMPS Inner Chassis Unit to release the catch
between the SMPS Inner Chassis Unit & the Rear Panel.
Step 4 Release 2 tabs.
Step 5 Remove Rear Panel.