1. Set the serial card (RFKZ0139) switch to “OFF” position,
then connect to PC’s serial port.
2. Connect the web camera to PC.
3. Connect the serial card to 4-pin serial port connector on
the Digital P.C.B. Unit via 6p-4p conversion cable
(RFKZ0602).
4. Click file name (Rpower_2.9.71(KEM480)_for Pana) and
Execute Adjustment Software (FERpower.exe) on PC.
5. Set ComPort matching to the available PC Port No..
6. Execute QR Reader software.
7. After staring up, select “ALL” from the pull-down menu.
To Next Page
Loading...
