3.2.2.2. Updating rmware using the USB device
When using the USB device to update the rmware.
(When using CD-R instead of USB device, perform same the procedures)
1.Download the latest rmware le of the unit.
The latest rmware required for version-up can be downloaded from “Support Information from NWBG/VDBG PAVC”web-
sitein “TSN system”.
Click le name to download.
After download, click le to decompress. (Total: 1 le).
2.Decompress the downloaded le.
The decompressed le will be named as follows.
File Name: PANA_HTS.FRM
Copy the le to root diretory of the USB device.
(If using CD-R instead of USB device, burn the le to a blank CD-R by a writing software.)
3.Update the unit.
1.Tunr the unit power on.
2. After the home screen is displayed and appears at LED display of the front panel,insert the USB device stored
downloaded latest rmware le to the front USB port of the unit(LED display change to ).(or insert the CD-R into
the unit and playback it.)
3.TV will show the rmware Update UI automatically and is displayed at LED display.
4.Wait for the rmware update.
5.when is displayed,update process is nished.
Remove the USB device (or the CD-R) and press the POWER button to turn the unit off.
6.Turn the unit on and the home screen appears the rmware update is completed.
To Next Page
Loading...
