Step 8 With forcing the left guide bar manually because the left
guide bar interfers with claw, draw the disc tray.
• Installation of the disc tray after replacement
Step 1 Slide the drive rack fully in the direction of arrow.
Step 2 Holding the drive rack not to move, install the disc tray.
Step 3 Align the drive rack with the driver gear.
Step 4 Holding the disc tray manually, rotate the pulley gear in
the direction of arrow.
Step 5 Rotate the gear 5 or 6 times manually, and then push
the disc tray.
21
SA-DK10
To Next Page
Loading...
